COVERAGE PREDICTION REQUEST ON-LINE FORM

    Please use this form to request a radio coverage prediction map.
    This is a free service offered by the ETCC Proposals Manager to UK bona fide Repeater Groups or serious applicants seeking to submit an amateur repeater or digital voice node proposal.
    This service is available to existing and proposed repeaters and nodes with callsign in the range GB3 or GB7

    Your name:  (required)
    Your Callsign:
    Your Email:  (required)
    Callsign for plot:   
    Are you the Keeper?:Yes      No    (required)
    Mode:Analogue      Digital
    Describe Site:  km    of (town) 
    NGR:  or Irish Grid  (required)
    Height: Metres above GROUND level.  (required)
    NOTE:The most common fault/error we receive is heights quoted above SEA level.
    The form asks for height above GROUND level.
    To avoid delays now and later please double check this NOW!
    Power Levels:
    TX Power  Watts at the TX output socket.
    Antenna Gain  dB in direction of max.radiation
    all Losses  dB    ERP  Watts   (required)
    Frequency: MHz (or just give band if unknown channel)  (required)
    NOTE/IDENTIFIER:
    Your map will be placed in a directory of the ukrepeater.net web site usually within a few days.
    To locate your map please create an identifier of 5 or 6 lower case characters which will allow you map to be placed at:
    http://www.ukrepeater.net/yourmap/(your identifier)
    You will NOT receive any further notification.

    Please note that the production of maps does not imply that the RSGB Emerging Technology Co-ordination Committee endorses any repeater or node at that site.

    To make any subsequent application please contact your ETCC regional or specialist member, details can be found by clicking here.
    Comment:

    Fields marked (required) MUST be completed. Your e-mail address should be given in case we need to reply.
    If notifying a repeater outage please use the E-ZERO FORM provided for this purpose.

     
    Image Verification
    Please enter the text from the image
    [ Refresh Image ] [ What's This? ]